H35ZI

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Download TDS (70 KB) | Download SDS

Parameter

Name Value Test Method
Viscosity, FAV  36 +/- 3 ASTM D-789
RV/96% H2SO4 2.34
Moisture Content (%) Max. 0.10 ASTM D-6869
Extractable Content (%) Max. 0.8 SOP-702-307

Physical Properties

Property Value Test Method
Specific Gravity (sp gr 23/23° C) 1.12 ASTM D-792
Melt Flow Rate (235°C, 1Kg) (g/10 min) 22.7 TM D-1238

Mechanical Properties

Property Value Test Method
Tensile Modulus, 23°C (73°F) (Mpa (psi)) 2,750 ASTM D-638
Flexural Modulus, 23°C (73°F) (Mpa (psi)) 2,465 ASTM D-790

Thermal Properties

Property Value Test Method
Melting Point (°C(°F)) 222 ASTM D-3418
Heat Deflection @ 264 psi (1.8 MPa) (°C(°F)) 47 ASTM D-648
Heat Deflection @ 66 psi (.45 Mpa) (°C(°F)) 152 ASTM D-648
Coef. Of Linear Thermal Expansion (µm/mm °C) 72 ASTM E-831
Download TDS (70 KB) | Download SDS